Analogue Input Scaling

In analogue input, scaling is the most important step. In order to get the right value in HMI, good scaling is a must to do.


Thanks to http://www.automationengineering.co.uk/wp-content/uploads/2011/08/calculation.jpg

For example
Analogue Input resolution = 12 bits = 4096 different levels ? 4000
Proccess value = 0 – 2000 mBar

Facebooktwittergoogle_plusredditpinterestlinkedinmail

40 thoughts on “Analogue Input Scaling”

  1. A device for converting the information contained in the value or magnitude of some characteristic of an input signal, compared to a standard or reference, to information in the form of discrete states of a signal, usually with numerical values assigned to the various combinations of discrete states of the signal.

  2. Data Acquisition Toolbox software gives you a way to scale linear analogue input signals from your sensor. You can combine this scale with specific technical units.

  3. I want to express thanks to you for rescuing me from this particular challenge. Right after surfing throughout the the web and meeting notions which are not beneficial, I thought my entire life was well over. Existing devoid of the solutions to the issues you’ve resolved as a result of the short article is a critical case, and the kind which may have in a wrong way affected my entire career if I hadn’t discovered your website. Your personal expertise and kindness in taking care of all the stuff was useful. I don’t know what I would have done if I had not come across such a solution like this. I can also now relish my future. Thanks for your time very much for your reliable and amazing help. I won’t think twice to recommend your web page to any individual who wants and needs direction on this topic.

  4. It is always very useful and also full of amusement for me personally and my office acquaintances to visit your web site no less than three times weekly to read the fresh guidance you have got. Of course, we are usually amazed for the surprising things served by you.

  5. I am very enjoyed for this blog. Its an informative topic. It help me very much to solve some problems. Its opportunity are so fantastic and working style so speedy. I think it may be help all of you.

  6. I don’t know what I would have done if I had not come across such a solution like this. I can also now relish my future. Thanks for your time very much for your reliable and amazing help. I won’t think twice to recommend your web page to any individual who wants and needs direction on this topic.

  7. I am the set up of a differential stress transmitter, which will be linked with the analogue knowing on the RS3 program.

  8. In the case of unipolar scaling with a 20% offset, the lower limit of the value range is 20% of the upper limit (Fig. 02 shows an example for an analog input value …

Leave a Reply

Your email address will not be published. Required fields are marked *


CAPTCHA Image
Reload Image